12V Diesel Transfer Pump, 38mm Small Portable Transfer Pump
12V Diesel Transfer Pump, 38mm Small Portable Transfer Pump
BUNDLE & SAVE
Couldn't load pickup availability
Safe & Secure Checkout
256-bit SSL encryption
protects every order.
30-Day Guarantee
Love it or get a full
refund. No hassle.
12V Diesel Transfer Pump, 38mm Small Portable Transfer Pump
For the jobs that should be easier
Keep the diesel can down. Let the pump do the lifting.
Drop this compact 12V pump into your can or drum, clip it to any 12-volt battery and flip the switch. Diesel flows up the hose and into the tank, while that heavy can stays right where it belongs: on the ground.
- 12V DC
- Up to 12 L/min*
- 38 mm slim body
- 10 ft cord with clips
Fueling up shouldn’t be the hardest part of the job
About 40 pounds. That’s what a full 5-gallon can of diesel weighs. The old way asks you to haul it up the tractor step, hold it at shoulder height and keep it steady while a so-called spill-proof spout dribbles diesel down the paint, over your gloves and onto your boots. Then you smell it in the cab for the rest of the week.
The old way
- Hoisting 40 lb to shoulder height, can after can
- Spouts that trickle, leak and need a third hand
- Funnels that overflow the second you look away
- Siphoning by mouth, then tasting diesel for hours
The easy way
- The can stays on the ground. Your back stays out of it.
- A steady, hands-free stream straight into the filler
- Flip the inline switch off the moment it’s full
- No sucking, no squeezing, no diesel smell in the cab
Same diesel. Same tank. A lot less wear and tear on you.
Built to do the heavy lifting for you
It’s barely bigger than a flashlight and weighs under 10 oz. Inside that stainless shell is everything you need to move diesel and water without breaking a sweat.
8,700 RPM copper motor
An all-copper motor spins up to 8,700 RPM and pushes up to 12 L/min*, about 3 gallons a minute. The liquid flowing around it helps keep it cool while it works.
38 mm slim stainless body
At 1.5" wide, it slips into jerry cans, standard 2" drum bungs and tight tank openings that bulky pumps can’t reach. The stainless shell stands up to diesel, water and weather.
Stainless mesh filter
A fine screen at the intake helps keep grit, rust flakes and debris out of the pump and out of your fuel system.
Inline on/off switch
Start and stop right from the cord, so you can top off with control instead of lunging for a battery clip at the last second.
10 ft cord with battery clips
Clip onto your truck, tractor, boat or any 12V battery. No outlet, no generator, no extension cord. Just power where the work is.
Sips power, stows anywhere
It draws 1.8 A max, while big vane transfer pumps can pull 19 to 35 A. And it packs down small enough for a glovebox, cab or toolbox.
Drop in. Clip on. Flip on.
From toolbox to flowing diesel in about the time it takes to find your gloves.
-
1
Drop it in
Push your hose onto the barb and add a hose clamp. Lower the pump all the way to the bottom of the can, drum or tank. It works fully submerged.
-
2
Clip it on
With the switch off, connect red to positive (+) and black to negative (−) on any 12V battery.
-
3
Flip it on
Aim the hose into the filler and flip the switch. Watch the level, switch off when it’s full, then lift the pump out and let it drain.
Pro tip: Keep the can close to the filler and the hose short and kink-free. Less lift and less hose means faster flow. For diesel, use fuel-rated hose.
If it runs on diesel, this pump’s got your back
Farms, job sites, docks and shops. Anywhere you’re moving liquid far from a fuel station or an outlet.
Farm & ranch Diesel
Fuel tractors, loaders and combines right where they’re working, straight from cans or 55-gallon drums. No more hauling equipment back to the barn.
Job sites Diesel
Top off mini excavators, skid steers, light towers and diesel generators with no fuel truck and no outlet in sight.
Diesel trucks Diesel
Carrying spare diesel on a long haul or a backcountry trip? Refuel without wrestling a heavy can up to the filler.
Marine Diesel Water
Move diesel from cans to deck fills, or empty coolers and fish boxes without the bucket brigade.
Shop heaters Diesel
Refill forced-air diesel heaters without tipping a heavy can indoors. Always refuel with the heater off and cool.
Water jobs Water
Fill livestock troughs from a tote, drain rain barrels and kiddie pools, or empty a cooler, using a pump kept just for water.
Why not just use a siphon, or a big pump?
Siphons still make you lift the can. Big vane pumps are heavy, power-hungry and priced for fleets. This one sits in the sweet spot.
| Compare | This pump | Pouring & siphons | Big vane pumps |
|---|---|---|---|
| Lift the can? | Never | Every time | No |
| Spills & smell | Minimal | Frequent | Minimal |
| Your effort | Flip a switch | Lift & squeeze | Mount & set up |
| Weight | 9.6 oz | Light | Often 15+ lb |
| Power draw | 1.8 A | None | 19–35 A |
| Price | A fraction | Cheap | $90–$300+ |
Big-pump convenience in a glovebox-size pump, for a fraction of the price.
One for diesel. One for water.
Once a pump has moved fuel, it shouldn’t move water you care about, because diesel residue lingers in the pump and hose. So keep two. One lives in your fuel kit, the other stays clean for troughs, rain barrels and coolers. With one in the truck and one in the barn, nobody goes hunting for the pump.
The gift they’ll actually use. For the farmer, the truck guy, the boat owner, or anyone who’s ever smelled like diesel after fueling up. A practical pick for holidays, birthdays and Father’s Day.
Choose your bundleWhy it earns a spot in every toolbox
- Keeps the heavy can on the ground instead of up at the filler
- Slips into jerry cans, 55-gallon drums and openings just over 1.6" (40 mm) wide
- Runs on any 12V battery: truck, tractor, boat or ATV
- Puts start and stop right in your hand with the inline switch
- Stainless body and mesh filter for clean, steady transfers
- Under 10 oz, so it rides along in a glovebox or toolbox
- Backed by our money-back guarantee
Specs and what’s in the box
| Voltage | 12V DC |
|---|---|
| Current draw | 1.5 A continuous, 1.8 A max |
| Motor | All-copper, up to 8,700 RPM |
| Flow rate | Up to 12 L/min (about 3.2 GPM)* |
| Body | 38 mm stainless steel, 1.57" × 4.72" overall |
| Weight | 9.6 oz (272 g) |
| Power cord | 10 ft (3 m) with inline on/off switch and alligator clips |
| Outlet | Hose barb for 5/8" (16 mm) ID hose |
| Intake | Stainless steel mesh filter |
| Liquids | Diesel, water and light oils. Not for gasoline. |
| Duty cycle | Up to about 20 min on, then 10–20 min rest |
| Fits openings | Just over 1.6" (40 mm) and wider |
In the box: 1× 12V submersible transfer pump with built-in 10 ft cord, inline switch and battery clips. Hose not included, so you can cut it to exactly the length you need.
*Rated maximum flow with no lift. Actual flow drops as lift height and hose length increase.
Good to know before you order
- Diesel, water and light oils only. Never use it with gasoline, alcohol, solvents or other flammable or corrosive liquids.
- Keep it fully submerged. It must never run dry, so it leaves roughly the last ½" in the bottom.
- Light-duty by design. Run it up to about 20 minutes, then let it cool for 10 to 20 minutes.
- Lift and hose length matter. The higher the filler and the longer the hose, the slower the flow.
- Check your can’s opening. It needs a clear opening just over 1.6" (40 mm). Some newer cans have a built-in screen in the neck.
- Fuel and water don’t share. Never use a pump that has moved fuel for water people or animals drink. Not certified for drinking water.
Frequently asked questions
Can I use it with gasoline?
No. This pump is made for diesel, water and light oils only. Never use it with gasoline, alcohol, solvents or any other flammable or corrosive liquid.
Will it fit in my fuel can or drum?
It needs a clear opening just over 1.6" (40 mm) wide, which fits most jerry can openings and standard 2" drum bungs. Some newer cans have a built-in safety screen in the neck, so take a quick look at yours before ordering.
Does it come with a hose?
No, so you can use exactly the length your setup needs. The barb outlet takes standard 5/8" (16 mm) inside-diameter hose. For diesel, use fuel-rated hose and secure it with a hose clamp.
How fast does it pump?
It’s rated up to 12 L/min, about 3.2 gallons a minute. At full flow, that empties a 5-gallon can in under 2 minutes. Real-world speed is a little slower as lift height and hose length increase.
Will it drain my battery?
Very unlikely. It draws 1.8 A max, so even a 20-minute session uses less than 1 Ah, a tiny fraction of a typical vehicle battery.
How long can I run it?
It’s built for light-duty, can-to-tank jobs. Run it up to about 20 minutes at a time, then give it 10 to 20 minutes to cool.
Why does it leave a little diesel in the bottom?
It’s a submersible pump, so it has to stay under the liquid to work, and it should never run dry. Expect it to leave roughly the last half-inch. Tilting the can near the end helps.
Will the cord reach my truck’s battery?
The 10 ft cord easily reaches the battery on most tractors and equipment. On longer trucks, set the can near the front fender and run a slightly longer hose to the filler.
Can I use it for water, too?
Yes: troughs, rain barrels, kiddie pools and coolers. Just keep one pump for fuel and a separate one for water.
You’ve hoisted your last diesel can.
Drop it in. Clip it on. Flip it on. Then get back to the work that actually matters.
Choose your bundle- Money-back guarantee
- Secure checkout
- Worldwide shipping
