2026 All-New 4 in 1 Tds Meter Digital Water Tester - Accurate and Reliable TDS EC & Temp(°C,°F) Meter - 0-9999ppm - Professional Testing for Drinking Water, RO/DI System, Aquariums etc Brand: MEXYBE
2026 All-New 4 in 1 Tds Meter Digital Water Tester - Accurate and Reliable TDS EC & Temp(°C,°F) Meter - 0-9999ppm - Professional Testing for Drinking Water, RO/DI System, Aquariums etc Brand: MEXYBE
BUNDLE & SAVE
Couldn't load pickup availability
Safe & Secure Checkout
256-bit SSL encryption
protects every order.
30-Day Guarantee
Love it or get a full
refund. No hassle.
2026 All-New 4 in 1 Tds Meter Digital Water Tester - Accurate and Reliable TDS EC & Temp(°C,°F) Meter - 0-9999ppm - Professional Testing for Drinking Water, RO/DI System, Aquariums etc Brand: MEXYBE
Your eyes can’t measure water. This pen can.
Dissolved minerals and salts are invisible. Filtered water and tap water can look identical, even when one reads 20× higher.
One quick dip turns what you can’t see into a clear number, in seconds. No strips, no chemicals.
Is your RO filter still doing its job?
RO systems have no warning light. A worn membrane still makes perfectly clear water, so most people replace by the calendar and hope.
Too early: you toss filters with life left in them.
Too late: you pay for filtering you’re not getting.
The 30-second RO check
Test your tap water, test your RO water, compare.
✓ 95% removed: working
✕ 58% removed: time to check the membrane
A healthy RO membrane usually removes 90% or more. Below about 80%, it’s generally time for a new one. Change pre-filters first, then retest.
Works with RO systems and TDS-reducing pitchers (the kind that say change at “006”). Carbon filters and softeners aren’t built to lower TDS, so with those a reading close to tap is normal.
Every number comes with an answer
A color chart is printed on the back of the pen, from ideal drinking water (0–50 ppm) to above the EPA guideline (500+).
The screen helps too: green at 40 ppm or less, red above 40. Red isn’t an alarm. Most tap water reads above 40. It just means: check the chart.
Readings in the 300s often come with hard water, the white crust in kettles and coffee makers.
Three steps. A few seconds.
Remove the cap, press ON/OFF.
Dip the tip, no deeper than the immerse line. Stir gently to clear bubbles.
Read your number. Press HOLD to lock it.
After use, rinse the probe and put the cap back on.
Small pen, serious specs
TDS, EC, °C and °F in one pen: press MODE to switch. It turns itself off after 2 minutes and weighs under 2 oz.
Six everyday uses
🚰Tap & bottled: learn your baseline, compare brands.
🔧RO filters: replace on data, not the calendar.
🐠Aquariums: track TDS between water changes.
🌱Hydroponics: EC mode checks nutrient strength.
☕Coffee & tea: the specialty coffee standard aims for about 150 ppm.
🚐RV & camping: check campground water before you fill up.
What it measures, and what it doesn’t
✓Total dissolved solids, such as minerals and salts
✓How well your RO or TDS-reducing filter works
✓Changes over time in any water you test
✕Lead, bacteria, chlorine, PFAS or other specific contaminants
✕pH or water hardness
✕Whether water is safe to drink
For specific contaminants or private wells, use a certified lab test, and this pen to track changes in between.
Why you’ll be glad you have it
✓No more guessing when to change filters
✓The answer is printed on the back of the pen
✓Green or red screen, readable at a glance
✓TDS, EC, °C and °F in one pen
✓Factory calibrated, ready out of the box
✓A practical gift for homeowners, fish keepers and coffee lovers
Specs and what’s in the box
| In the box | Tester, protective cap, 2 × LR44 batteries, manual with TDS chart |
| Measures | TDS, EC, °C / °F |
| TDS range | 0–9990 ppm |
| Accuracy | ±2% |
| Temperature | 32–176 °F (0–80 °C) |
| Display | Backlit: green at 40 ppm or less, red above 40 |
| Auto-off | After 2 minutes |
| Weight | About 1.8 oz |
Why is my screen red?
It turns red above 40 ppm, and most tap water is above 40. It’s a quick cue, not a warning. Check the chart on the back to see what your number means.
Filtered water reads the same as tap. Is it broken?
Most likely not. Carbon filters and softeners aren’t designed to lower TDS, so a similar reading is normal. RO systems and TDS-reducing pitchers should show a big drop.
Does it test for lead, bacteria or chlorine?
No. It measures total dissolved solids, not individual substances. For specific contaminants, use a certified lab test.
Is water above 500 ppm unsafe?
Not necessarily. The EPA’s 500 mg/L figure for TDS is a non-enforceable guideline based on taste, scaling and staining, not a health limit. A TDS number alone can’t tell you whether water is safe.
Does it need calibrating?
It’s calibrated at the factory and ready to use. To check it, test distilled water: it should read close to zero.
Is it waterproof?
No. Dip only the tip, no deeper than the immerse line, and keep the screen and buttons dry.
Why does the number move for a moment?
Give it a few seconds to settle and stir gently to clear air bubbles. Press HOLD to lock the number.
What’s your water’s number?
Find out today, then keep checking after every filter change, every water change and every new campsite.
